allen bradley plc simulator for windows 10

So there may be some things you have to do with the PLC before you can connect to it.Īnd then number four, we configure a driver in RSLinx to talk to that specific PLC over the specific protocol you're going to use, whether it's Ethernet, DF1, or USB. Number three, we're going to set up your PLC for comms and some PLCs are not set up to communicate with your computer out of the box.

So if you're connecting over Ethernet that means setting the IP address on your computer, or if you're talking over serial or USB, you may need to configure the comm port that you're connected through. Number two, we need to set up your computer so that it's ready to connect to the PLC. That could be a serial cable or a USB cable with some of the more modern controllers, or it could be ethernet or even something else. Number one, you need to choose and connect some sort of cable between your computer and the PLC. There are 4 steps you need to take to get your Windows computer talking to an A-B PLC.

This post is all about connecting to an Allen-Bradley PLC using Ethernet communications.

Allen bradley plc simulator for windows 10